RESPONSIBILITIES : Set up and operate automatic inert gas arc welding machines to do such welding as longitudinal and circumferential welding of assemblies. Layout locations and make own setups as required. Weld Company products by certified processes maintaining critical alignment tolerances and improvising tooling and holding fixtures as required. Manually fusion weld various metals for fabrication of tooling, and maintenance, repair and assembly of plant machinery, equipment and buildings. Must pass and maintain all required certifications including civil code, ASME, and customer requirements to perform assigned work utilizing the following welding processes : shielded metal arc, gas, tungsten inert gas (TIG), metal inert gas (MIG), and plasma. REQUIREMENTS : Must be capable of passing Journeyman Certification as well as other certifications as required. Must be capable of passing an appearance test (root pass and two fill passes on stainless duct weld sample in 6G) Must have a proven safety record and experience with PPE. Experience reading, comprehending and using planning and drawings to meet required specification requirements. Three years' G.T.A.W. experience welding hard alloys (stainless steel, titanium Inconel and / or steel). Fabrication / Welding schooling or equivalent can be substituted for years of experience on a 2 to 1 basis. 1.5 years of school 3 years' experience. Experience welding duct assemblies (or similar) and controlling weld distortion and shrinkage. PREFERRED REQUIREMENTS : Prior experience welding Rocket engines and or propulsion systems. Prior experience using mixed torch gases (95Ar / 5H2, Argon Helium mixes). Prior certification in In-Place-Tube, Automatic or Orbital Welding. Prior certification to D17.1 or Journeyman certification. PHYSICAL REQUIREMENTS / WORK ENVIRONMENT : The work environment may require a combination of indoor and outdoor activity (hot, cold, wet, humid conditions) with a varied amount of walking, standing, sitting, climbing (i. e. ladders, stair, scaffolding, ramps), balance (maintaining body equilibrium to prevent falling when walking, standing, or crouching on narrow, slippery, or erratically moving surfaces), bending, reaching, handling / fingering (seizing, holding, grasping, turning picking, pinching), stooping, kneeling, crouching and ability to lift / carry / push / pull up to 50 pounds. Work may require the ability to operate material handling equipment (forklift, crane, hoist, man lift, etc.) in a safe manner. While performing the duties of this job, employees may work around variable noise levels or with fume or airborne particles, hazardous chemicals, etc. requiring the use of personal protective equipment such as face protection (safety glasses, goggles, face shield), foot protection (i. e. steel toed shoes, rubber boots, etc.), gloves, hard hat, shop coat and hearing protection. Work requires the ability to change into or out of personal protective equipment when entering or exiting manufacturing, laboratory, or other areas. Some employees may be required to drive between various locations within the Company facility or between locations. Work duties may also be required to work in a standard office setting and to use standard office equipment, including a computer and / or the ability to travel by air or auto. Ability to distinguish colors may also be necessary. This position may be expected to work varying shifts and hours to ensure successful operation of activities in the organization. EDUCATION : Accredited High School Diploma or GED. SHIFT : 9 / 80 9 / 80 2nd shift work hours are 2 : 30pm- 11 : 30pm

Position Summary Mobile Intrack Welder is responsible for driving, operating, diagnosing, and maintaining a mobile electric flash-butt welding machine. Work includes driving a welding truck (CDL required) to and from work locations and setting the welding truck on the track. Primary / Essential Responsibilities and Duties Will perform Intrack Welding functions. Capable of performing job duties in a safe and professional manner. Self-directed individual with the ability to supervise and lead a small group. Responsible to report customer and production status in a professional and timely manner. No prior welding experience is required. Must have the ability to read precision instruments and gauges with a background in heavy mechanical / electrical machines and equipment. Perform QA inspections as required. Candidate must be able to lift 50 lbs. Candidate will set up and perform weld operations including moving jack stands into place prior to making welds, cleaning and removing ballast rocks in the work area, vehicle maintenance, and cleaning, truck movement while on track from work site to work site, grinding welds as needed. Must be able to work in all weather conditions. Required Skills and Qualifications Must be 18 years or older A valid class A driver’s license and satisfactory driving record Basic computer skills Track experience preferred Good verbal and written communication skills. Ability to communicate with all levels of employees and customers. Fill out and organize work reports Must be able to travel 90% of time Ability to pass drug screening and background check. High School Diploma / GED required. Physical Requirements and Working Conditions Works both indoors and outdoors Travels to field locations to provide repairs or maintenance Frequently performs physical activities that require considerable use of the arms and legs and moving the whole body, such as standing, lifting, walking, stooping, bending, reaching, and handling of materials, equipment, and tools Uses hands and fingers to operate equipment and tools involved in repairs Lifts, pushes, pulls, and carries heavy objects, machinery, and tools up to 50 pounds Works around vehicles and machinery with moving parts Exposed to exhaust fumes, gasoline, and diesel fuel May be exposed to harsh weather conditions May be exposed to loud noise. This job description is not intended to represent a complete, comprehensive list of all duties and responsibilities that may be required in this position. There may be unplanned activities and other duties as assigned. RailWorks is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment with Railworks without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristics protected by law. RailWorks is North America’s leading track and transit system experts for over 100 years and with 45 offices across the U. S. and Canada. We take on challenging projects every day and our success rely on a collaborative and open-minded work environment that encourages teamwork, positivity, and ingenuity. We are committed to creating a culture of trust, respect, and acceptance. RailWorks also offers opportunities to grow your career, develop your skills and pursue success.

Welder - Journeyman (Second Shift) Location : Canoga Park, CAPay Rate : $28.11 / HRJob Type : Direct HireSchedule : Second Shift - 9 / 80 Candidates must be a Relocation package if the candidate is more than 50 miles from our location Additional Information : The Second Shift work hours are 2 : 30pm- 11 : 30pm - 9 / 80 Duties : -Set up and operate automatic inert gas arc welding machines to do such welding as longitudinal and circumferential welding of assemblies. Layout locations and make own setups as required. -Weld Company products by certified processes maintaining critical alignment tolerances and improvising tooling and holding fixtures as required. Manually fusion weld various metals for fabrication of tooling, and maintenance, repair and assembly of plant machinery, equipment and buildings. Must pass and maintain all required certifications including civil code, ASME, and customer requirements to perform assigned work utilizing the following welding processes : shielded metal arc, gas, tungsten inert gas (TIG), metal inert gas (MIG), and plasma. Skills : -Minimum 5 years of experience in related field. Minimum Requirements for Journeyman Welder : Minimum Job Requirements (Specific) : -Three years' (stainless steel, titanium Inconel and / or steel). Fabrication / Welding schooling or equivalent can be substituted for years of experience on a 2 to 1 basis. 1.5 years of school 3 years' experience. Experience welding duct assemblies (or similar) and controlling weld distortion and shrinkage. Minimum Job Requirements (Generic) : -Must be capable of passing Journeyman Certification as well as other certifications as required. Must be capable of passing an appearance test (root pass and two fill passes on stainless duct weld sample in 6G) -Must have a proven safety record and experience with PPE. Experience reading, comprehending and using planning and drawings to meet required specification requirements. Experience (Preferred) : -Prior experience welding Rocket engines and or propulsion systems. Prior experience using mixed torch gases (95Ar / 5H2, Argon Helium mixes).-Prior certification in In-Place-Tube, Automatic or Orbital Welding. Prior certification to D17.1 or Journeyman certification. Education : -High School graduate or equivalent required.-Associates Degree preferred. Certifications & Licenses : -Must be capable of passing Journeyman Certification as well as other certifications as required. Work Environment / Physical Requirements : -The work environment may require a combination of indoor and outdoor activity (hot, cold, wet, humid conditions) with a varied amount of walking, standing, sitting, climbing (, stair, scaffolding, ramps), balance (maintaining body equilibrium to prevent falling when walking, standing, or crouching on narrow, slippery, or erratically moving surfaces), bending, reaching, handling / fingering (seizing, holding, grasping, turning picking, pinching), stooping, kneeling, crouching and ability to lift / carry / push / pull up to 50 pounds. Work may require the ability to operate material handling equipment (forklift, crane, hoist, man lift, etc.) in a safe manner. While performing the duties of this job, employees may work around variable noise levels or with fume or airborne particles, hazardous chemicals, etc. requiring the use of personal protective equipment such as face protection (safety glasses, goggles, face shield), foot protection (, steel toed shoes, rubber boots, etc. gloves, hard hat, shop coat and hearing protection. -Work requires the ability to change into or out of personal protective equipment when entering or exiting manufacturing, laboratory, or other areas. Some employees may be required to drive between various locations within the Company facility or between locations. -Work duties may also be required to work in a standard office setting and to use standard office equipment, including a computer and / or the ability to travel by air or auto. Ability to distinguish colors may also be necessary. -This position may be expected to work varying shifts and hours to ensure successful operation of activities in the organization.

Pay $20 / hr - $25 / hr depending on experience Requirements : Own reliable truck or van and welding machine Minimum 3+ years of work experience in residential welding. Able to determine the appropriate welding equipment or method based on requirements Operate angle grinders to prepare the parts that must be welded Repair machinery and other components by welding pieces and filling gaps Be familiar with troubleshooting gates and operators Professional Certification (e.g. an AWS welding certificate) will be a plus! Other requirements : Must have a VALID driver's license and a car to use for work Must be willing to travel within LA County We are an equal opportunity employer Powered by JazzHR

What does the job involve? Summary : Ability to weld product parts and assemblies, normally in areas of easy access on flat or horizontal surfaces, in accordance with customer specifications and requirements, using gas, and inert gas arc. Please note : This role is on 2nd shift, which starts around 3 : 30 pm Essential Duties and Responsibilities : Under general supervision, must be able to perform a variety of job duties including, but not limited to : Ability to determine the correct welding rod to use, flux to apply, and tooling appropriate method to use and relationship of parts. Must be certified in at least two of the following alloy groups in accordance with MIL T and Quality Control Procedure #9, Groups I, II, III, IV, and VI. Departmental job requirements may require more than two certifications. Perform certified seam flange, edge, fillet and lap-fusion welding on various types of materials which are the same or nearly the same thickness at point of weld. Weld fittings on tubing, ducts, tanks and other similar units. Weld tanks, vessels, tubing, brackets, boxes, shelves and other assemblies which are subjected to high stress or pressures. Be familiar with shop practice and assembly procedures to determine whether parts are fitted properly and meet specifications prior to welding. Have fair knowledge of weld symbols and weld specs. Performs rework, repair and other associated operations relating to the work described herein when such requirements are characteristic of the classification. Follow all Senior policies and procedure. Other duties as assigned. In addition to the above, Welders are to maintain an organized, clean and safe work area using safety standards and expectations while adhering to all quality practices. Senior is an