About ArcelorMittal ArcelorMittal is one of the world’s largest steel producers. We use the most innovative technology to create the steels tomorrow’s world will be made of. Every day over 190,000 of our talented people, located in over 60 countries, push the boundaries of digitalization and use advanced technology to create a world that is stronger, faster and smarter. To help make this possible, they know they can depend on the support and training that a company of our scope and scale can provide. Why you should join our Team At ArcelorMittal North America we have created something special. A better place to work and an ability to make a real difference to the world. We provide exceptional training and career paths. Our goal is to have our leaders be home grown and to provide all employees opportunities for growth, development, and movement within our organization. We only accept A players as part of our team. Join our family, be a part of a great story and help us continue to grow and be successful. The ideal candidate will support the Project team through as Project phases, Engineering, construction, start up, and operation with environmental compliance management, development of work instructions and procedures for environmental pollution control equipment, and identification and execution of regulatory strategies that bring the most value to AM while satisfying stakeholders expecting an environmentally responsible production. WHAT YOU’LL BE DOING : Project primary environmental focal point for air, stormwater, wastewater, solid waste, US Corps of Engineers permitting Coordinate permitting elements with operations, project management, consultants, and regulatory agencies Effectively communicate and implement regulatory requirements and permit conditions Prepare, review, and submit required external and internal reports Perform monitoring and inspection of construction contractors for environmental related compliance with the contractor’senvironmental management plan Develop and obtain variances or alternative operating conditions to protect site from enforcement actions Investigate environmental incidents using causal learning and root cause failure analysis to implement corrective actions Lead or participate in continuous engineering development, ensuring that all environmental requirements and permits will be in place when necessary. Report deviations or exceedances to applicable regulatory agencies as required by permits or other applicable requirements Evaluate and identify federal, state, and local environmental compliance issues Lead the air emission stack testing with the support of the environmental team Provide data & information to the environmental team for external communications Communicate with procurement and OEMs to ensure optimal pollution control equipment is acquired for the steelmaking mill Develop a plant operator’s environmental handbook and train operators and staff, as needed WHAT WILL YOU NEED : B.S. in Engineering (Chemical, Environmental, Civil or Mechanical), Environment Management, Chemistry, Biology or other related field, or combination of post-secondary education and related experience A minimum of 7+ years’ experience interpreting environmental standards, rules and regulations, and how they are related to the organizations processes, facilities, and equipment Experience required with environmental compliance of greenfield construction activities (preferable knowledge with Texas requirements) , such as; construction, stormwater, and managing contractor compliance with environmental regulations Experience interpreting standards, rules, and regulations, to include EPA, ADEM, USACE, DOT required Experience working on a diverse set of environmental permitting projects including air quality, water quality, and waste management Broad understanding of commonly employed engineering principles, environmental and safety requirements, and familiarity in working with local, state, and federal agencies Proficiency with Microsoft Office Products (Excel, Word, PowerPoint, Outlook) Preferred requirements : SAP knowledge preferred. Experience with DRI and CCS operations preferred Experience with ISO-14001 auditing preferred. TRAITS TO BE SUCCESSFUL Capable of quickly learning additional software packages to be used, as needed Demonstrates strong decision-making, analytical, and problem-solving skills Makes sense of complex, high quality, and sometimes contradictory information to effectively solve problems Consistently achieves results, even under tough circumstances Able to competently handle a fast-paced environment, with strong organizational, multi-tasking, and prioritizing skills Ability to deal sensitively with confidential material Demonstrates strong interpersonal communications skills, written and verbal Demonstrates strong work ethic and displays a high degree of professionalism Ensure working knowledge of competencies as defined in ISO 14001 (current version), IATF 16949 (current version), and ISO 17025(current version) Location : Corpus Chirsti, TX HOURS OF WORK : Days, Monday to Friday with extended hours as required due to periods of peak workloads ArcelorMittal North America is an equal opportunity employer. We evaluate qualified applicants without regard to race, age, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

What You'll Do Sampling and assessments of soil, groundwater, air, and other materials Observing and documenting field activities Using field screening equipment and documenting readings Working with GIS / GPS (a big plus) Interacting and communicating daily with contractors, technicians and project managers Writing clear field reports of site activities each day Want to experience what this job entails? Click below : What We're Looking For Actively pursuing a Bachelor or Master degree in Civil Engineering with an environmental focus, Geology, Environmental Science or related degree Interest in environmental regulations and how environmental issues are related to the construction process Must be able to provide suitable transportation for use on job sites Mileage will be reimbursed Position requires carrying 40 70 lbs multiple times a day or occasionally lifting 85 lbs to waist height Who We Are Founded in 1988, Engineering Consulting Services (ECS) is a leader in geotechnical, construction materials, environmental, and facilities engineering. ECS is currently ranked 2 in Zweig Group’s Hot Firms List (Zweig Group, June 2023), 61 in Engineering News-Record’s Top 500 Design Firms (ENR, April 2023), and 142 in Engineering News-Record’s Top 200 Environmental Firms (ENR, July 2022). To learn more about us, click here. We love our employees and we show this through providing some great benefits, including paid time off, health and other insurance plans, retirement and college savings plans, and more. ECS is an Equal Opportunity Employer. This means that all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.

Overview We have an opening for an Environmental Analyst to work in the Fort Worth, TX area. Our Client prides themselves on their pursuit of excellence. A natural gas producer, they focus on hiring the best people and leveraging the latest technologies that help them concentrate on their carbon-negative initiatives. Their goal is to the shift the energy landscape by proving that profitability and sustainability can not only coexist, but thrive in today’s world. Responsibilities The Environmental Analyst will be responsible for compliance with state and federal environmental program requirements including air quality, SPCC (spill prevention, control, and countermeasure), remediation and waste management. This position involves evaluating the potential environmental risks associated with natural gas operations and developing strategies to mitigate those risks. This position applies practical job knowledge. Usually works independently under general supervision and requires the ability to influence others in the work area by explaining facts, policies, and practices. The problems faced are difficult but generally not complex. Develop and implement environmental programs and procedures. Monitor and analyze air, water, and soil quality for compliance with local, state, and federal regulations. Lead spill reduction planning and manage spill cleanup. Manage SPCC (spill prevention, control, and countermeasure) and storm water permit planning and compliance. Assist with waste management and compliance. Interface with agency personnel during inspections, inquiries, and environmental events. Communicate environmental data and analysis to stakeholders. Conduct research and analyze data, identify emerging environmental issues and trends, and implement best practices. May provide guidance and assistance to entry level professionals and / or support employees. Perform other duties as required. Qualifications REQUIRED SKILLS Ability to interpret and apply regulatory requirements. Demonstrated knowledge of TRRC (Texas Railroad Commission), TCEQ (Texas Commission on Environmental Quality) and federal programs related to oil and gas production. Demonstrated ability to thrive in a dynamic fast-paced environment. Knowledge of the oil and gas industry, including regulatory requirements, trends, emerging issues and operating processes strongly preferred. Ability to work independently and as part of a team Interpersonal, collaboration, and communication skills Attention to detail and organization skills Cognitive and problem-solving skills EDUCATION & EXPERIENCE High school diploma or equivalent required. Bachelor’s degree preferred. Typically requires a minimum of 3 years relevant experience. Options Sorry the Share function is not working properly at this moment. Please refresh the page and try again later. Share on your newsfeed

Job Description BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose : Work is performed in industrial settings including : assembly plants, metal fabrication plants, refineries, and power train plants. Collect, sort and transport disposables and recyclables including : trash, hazardous waste, scrap metal and other waste streams throughout a facility to designated container and location. Primary Duties / responsibilities : Perform job duties in a safe manner compliant with policies, procedures and practices. Maintain a safe, neat and clean work environment this includes : work area, equipment, locker rooms, break rooms, and office areas. Model professional behavior at all times; report to work as scheduled, on time and prepared to work. Collect trash, recyclables and hazardous waste from various locations throughout the facility. Breakdown scrap parts for repair or recycling Transport waste / recyclables to disposal container and / or storage location. Load semi-trailers and roll-off boxes for shipment to landfill or recycling center. Maintain storage areas, and drum pads in accordance to regulations. Document and inform the manager or designated person of any contamination in recycling containers. Complete reports and documentation correctly and submit timely as directed. Participate in meetings to access the work environment for safety and effectiveness. Operate equipment safely and compliant with policies including : fork-trucks, tuggers, and transport carts. Perform preventive maintenance (PM) and safety checks on mobile equipment before and after operating; report any defects appropriately and timely. Demonstrate a commitment to learning and development; stay current of safe work practices, policies and regulations. Work effectively in a team environment and provide support and assistance to others. Commitment to promoting and creating a safety culture and positive work environment. Perform other job duties as requested to support the business operations. Qualifications Education / Experience / Background : High School diploma or GED Experience operating a forklift or similar equipment desired Knowledge / Skills / Abilities : Able to read and understand instructions in English Push / pull and frequently lift and carry up to 40 lbs. Manual dexterity to manipulate small hand tools, pick up and sort small parts. Lift, carry, push or pull equipment of various size, shape, and weight. Able to sit periodically and for extended periods of time, climb ladders / stairs, reach below knees and above shoulders, kneel and crawl to access work areas. Frequent standing, walking, bending, and stooping, able to reach forward and grasp equipment Ability to balance and walk on wet and slick surfaces, metal grates, narrow platforms, and uneven surfaces. Work in loud, cold, hot, wet and dry environments. Required Certification / Licenses / Training : Valid Drivers License Additional Information

Job Description BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose : Work is performed in industrial settings including : assembly plants, metal fabrication plants, refineries, and power train plants. Collect, sort and transport disposables and recyclables including : trash, hazardous waste, scrap metal and other waste streams throughout a facility to designated container and location. Primary Duties / responsibilities : Perform job duties in a safe manner compliant with policies, procedures and practices. Maintain a safe, neat and clean work environment this includes : work area, equipment, locker rooms, break rooms, and office areas. Model professional behavior at all times; report to work as scheduled, on time and prepared to work. Collect trash, recyclables and hazardous waste from various locations throughout the facility. Breakdown scrap parts for repair or recycling Transport waste / recyclables to disposal container and / or storage location. Load semi-trailers and roll-off boxes for shipment to landfill or recycling center. Maintain storage areas, and drum pads in accordance to regulations. Document and inform the manager or designated person of any contamination in recycling containers. Complete reports and documentation correctly and submit timely as directed. Participate in meetings to access the work environment for safety and effectiveness. Operate equipment safely and compliant with policies including : fork-trucks, tuggers, and transport carts. Perform preventive maintenance (PM) and safety checks on mobile equipment before and after operating; report any defects appropriately and timely. Demonstrate a commitment to learning and development; stay current of safe work practices, policies and regulations. Work effectively in a team environment and provide support and assistance to others. Commitment to promoting and creating a safety culture and positive work environment. Perform other job duties as requested to support the business operations. Qualifications Education / Experience / Background : High School diploma or GED Experience operating a forklift or similar equipment desired Knowledge / Skills / Abilities : Able to read and understand instructions in English Push / pull and frequently lift and carry up to 40 lbs. Manual dexterity to manipulate small hand tools, pick up and sort small parts. Lift, carry, push or pull equipment of various size, shape, and weight. Able to sit periodically and for extended periods of time, climb ladders / stairs, reach below knees and above shoulders, kneel and crawl to access work areas. Frequent standing, walking, bending, and stooping, able to reach forward and grasp equipment Ability to balance and walk on wet and slick surfaces, metal grates, narrow platforms, and uneven surfaces. Work in loud, cold, hot, wet and dry environments. Required Certification / Licenses / Training : Valid Driver’s License